Index
V700 features one rail design with up to 58A.
|
Model |
RS-700-AFBA-G1 |
|
Type |
Intel Form Factor ATX 12V V2.31 |
|
Dimension (W x L x H) |
150 x 170 x 86mm / 5.9 x 6.7 x 3.4 inch |
|
Weight |
1.9kg |
|
Input Voltage |
90-264Vac (Auto Range) |
|
Input Current |
10 - 5A |
|
Input Frequency Range |
60 - 50Hz |
|
PFC |
Active PFC (>0.9) |
|
Power Good Signal |
100-500ms |
|
Hold Up Time |
>17ms |
|
Efficiency |
90% Typically |
|
MTBF |
>100,000 Hours |
|
Protection |
Over Voltage Protection (OVP) Under Voltage Protection (UVP) Over Power Protection (OPP) Over Temperature Protection (OTP) Short Circuit Protection (SCP) |
|
Output Capacity |
700W |
|
Operation Temperature |
0~40°C |
|
Regulatory |
CE/TUV/TUV-SUDNRTL/FCC/GOST/CCC/BSMI/C-tick/KCC |
|
Fan |
Fluid Dynamic Bearing (FDB) 135mm Fan (Protechnic: MGA13512XF-025) |
|
Certifications |
80 PLUS Gold |
|
Connector |
M/B 1x20+4 Pin Connector, 650 mm |
|
Warranty |
5 years |
There are plenty of cables to choose from and they are long enough for even the biggest chassis out there. We appreciated the decision to include 720mm long 12V CPU cables, as too many PSUs ship with short cables. Most vendors still ship 550mm long cables and they don’t offer nearly as much flexibility as we’d like. Enthusiasts like to keep their rigs nice and tidy, hence the ability to nicely tuck cables somewhere where they don’t interfere with other components is a must. Our only complaint is the relatively tight spacing of peripheral connectors.
Only the thick ATX cable is wrapped in a non-transparent mesh, while all the others are flat. The cables feel sturdy, but they are flexible enough to handle with ease.
